stone crusher for sale

Bearing is an important part of ore crusher, it is very important for calcite crusher. Long time crushing processing operation will also lead to the bearing wear problem of ore crusher. Today, taking calcite crusher as an example, we will talk about the shaft wear repair process.

 

1. Observe the equipment condition and operating environment on site, clean up oil and impurities, and measure relevant data;

 

2. Perform surface baking oil treatment on the worn parts, and then polish off the surface oxidation layer and high point;

 

3. Clean the surface to be repaired with anhydrous ethanol, dry it for later use;

 

4. Apply SD7000 release agent on the base position of the shaft and the position that needs to be protected;

 

5. Mix Solay carbon nanopolymer material proportically until there is no color difference, and then apply the material to the surface to be repaired;

 

6. Use the benchmark scraping tool to scrape the material to the size along the benchmark on the shaft, and wait for the material to cure;

 

7.After the material is cured, polish to remove the excess material and reinstall the parts to complete the repair.